CAM-LOK® BARREL ADAPTERS

Features:

• CAM-LOK® (Covert Application Mount - Locking) Patented Universal QD piston attachment system
• 3 mounting positions, 120 degrees separated for rapid mounting
• Forward taper surface locks in place with interfacing piston and drastically reduces or eliminates common baffle/end cap strikes
• Coarse threads are top cut to increase durability and wear resistance
• 3/4"or 19mm wrench pattern accommodates socket wrench for secure and easy installation
• Compatible with Universal QD pistons (sold separately)
• Compatible with Universal Direct Thread Adapters (sold separately)
• Internal bore reduces side concussion and visual disturbance vs blind muzzle
• Total system weight is identical to legacy direct thread pistons
• QPQ Nitride finish for attractive, durable black finish
• 17-4 stainless steel material
• Also supports Universal Carry Comp

*NOTE*

1/2x28: Indexes off the barrel shoulder. For use on standard, sub compact, compact, and full-size tilt-barrel firearms that have a normal profile of barrel (G19, G17, P320, S&W M&P 2.0).

1/2x28 Special: Indexes off the face of the muzzle. For use on micro compact tilt barrel firearms with little to no barrel shoulder due to the thinner profile of the barrel (G43, G43x, G48, P365, P365XL, Hellcat).

If you are concerned about fitment, the 1/2x28 special will work on a normal profile barrel as well. It will operate the same, but if you have a longer threaded surface on your barrel, you may see uncovered threads rearward of the muzzle device when using this option.

1/2x28 SMG/PCC: Made specifically for SMG’s and PCC’s (Sub Machine Guns and Pistol Caliber Carbines) that have the industry standard length of threads commonly found on carbines: 0.625.”

Glock Gen 4 or Gen 5 users: It is reported the barrel adapter may touch your guide rod when the slide reciprocates. We have not been able to replicate in house using CAM-LOK®/EZ-LOK™ barrel adapters with Glock Gen 4/5 recoil spring assemblies. However, the items below allow your Glock® Gen 4/5 to work with a Glock® Gen 3 recoil spring assembly that does not have this reported issue.

Installation & Use Notes : Suppressor should be tightly assembled when using this product to avoid inadvertent disassembly of the suppressor when removing it from QD barrel adapter. We recommend to check suppressor tightness every 2-3 magazines to ensure it has not worked loose due to vibration caused by the cycling of the slide. Barrel adapters should be installed to their host firearms with a minimum torque rating of 20 ft/lbs using a 3/4 socket and needle type torque wrench. Use of a box end wrench will not have optimal contact with the wrench flat geometry on the adapter and may damage the adapter.

FOR FIXED BARREL APPLICATIONS (PISTOL CALIBERS ONLY) : This can be accomplished using one of our CAM-LOK® direct thread adapters, in conjunction with a CAM-LOK® barrel adapter.